Model UCS-01
6
INITIAL CONFIGURATION
NOTE: In order to completely configure the Scheduler-Timer it is necessary to
know the Network ID, Device ID(s) and Link ID(s) to be controlled, writing down
the Device ID for each UPB device to be scheduled is recommended.
With the UCS plugged into power on a configured UPB network, press MENU
from the Idle Screen. The following menu selections are available:
1) Set Event
2) Set Time
3) Set Location
4) Delete Events
5) Set Randomness
6) Set Network
7) Set Contrast
8) CIM Mode
9) Clock Source
Step A: Set Time
• Press the Down button to select Set Time.
Press ENTER
button to view the Set Time screen.
• Move cursor with Right and Left buttons to select character to change.
• Use Up and Down buttons to change character.
• Adjust time by hours and minutes, Up or Down from character on the
display.
• Use the Right button to select the Schedule Mode character, then use
UP or Down buttons to select [OFF], [RUN] or [VAC]. The Scheduler-
Timer will be turned ON by selecting either run [RUN] or vacation [VAC]
mode.
• Adjust month / day / year and day of the week, similarly.
• When the time, mode, date and day of the week have been set, press
the ENTER
button to save the settings.
NOTE: Pressing the MENU button instead of the ENTER
button will exit the
screen without saving the settings.
Controller, Scheduler-Timer
7
Step B: Set Location
• Press MENU from the Idle Screen.
• Press the Down button to select Set Location.
• Press ENTER
button to view the Set Location sub-menu.
• Select Zip Code and press Enter
.
o Zip Code – Enter Zip by using Up / Down and Right / Left.
o Press Enter
to save.
o Screen will toggle to Longitude & Latitude screen.
o Make adjustments if necessary and known, otherwise do not
change.
o Press Enter
.
o UCS will calculate and display Dawn (sunrise) and Dusk
(sunset).
• Press ENTER
button to save.
Step C: Set Network
• Press MENU from the Idle Screen.
• Press the Down button to select Set Network.
• Press ENTER
button .
• Enter the UPB Network ID.
Press ENTER
button to save.
Hint:
if the Network ID
is unknown it will be
necessary to run the
UPStart configuration
software or the Pocket
Programmer (model
UPP-20) to determine
the Network ID.
To find the Network ID
in UPStart, from the top
menu select Network,
then Network Properties.
(8 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais